CB2 HYDE 조립 지침 - 페이지 2
{카테고리_이름} CB2 HYDE에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 HYDE 4 페이지. Square open wall ccabinet
CB2 HYDE에 대해서도 마찬가지입니다: 조립 지침 (4 페이지), 조립 지침 (5 페이지)
페이지 인쇄hyde
SQUARE OPEN WALL CABINET
A
top and
bottom panel
NOTE: Make sure
arrows on each cam
points toward nearest
edge with holes
A. Insert 4 cam screws and 6 wood dowels into
top and bottom panel as shown. Secure, but do
not over tighten, cam screws with a phillips head
screwdriver.
B. Insert 2 wood dowels and 4 cams into left and
right side panels. Make sure arrows on each cam
1
points towards nearest edge with holes.
B
A
top
panel
A. Fit dowels and cam screws of top panel into
assembly as shown.
B. Using a screwdriver, turn cams clockwise to
secure. Make sure cam securely engages each
3
cam screw.
Made in Vietnam - r03
NOTE: Do not over
tighten cam screws
B
left and
right side
panels
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
right side
panel
Fit dowels of left and right side panels into
2
corresponding holes of back frame as shown.
Fit back panel into corresponding grooves of
4
assembly as shown.
back
frame
left side
panel
back
panel
Page 2 of 4