CB2 KICKSTAND 조립 지침 매뉴얼 - 페이지 3

{카테고리_이름} CB2 KICKSTAND에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 KICKSTAND 7 페이지. Bookshelf

페이지 인쇄
CB2 KICKSTAND 조립 지침 매뉴얼
kickstand
NOTE: Do not over tighten the cam screws
top panel
Insert 4 cam screws into top panel as shown.
Secure, but do not over tighten, with a phillips
3
head screwdriver.
left side panel
top panel
Fit dowel of left and right side panels into top
panel. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
5
screw.
Made in Taiwan - r05
BOOKSHELF
NOTE: Make sure grooves
of side panels and top panel
are assembled on the same
side
right side panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Make sure arrows
on each cam point towards
nearest edge with holes
left and right side
panels
Insert 2 large cams and 2 wood dowels into
right and left side panels as shown. Make sure
arrows on each cam point towards nearest edge
4
with holes.
B
A
A. Insert back panel into grooves of assembly.
B. Attach bottom panel to assembly with 4
6
large screws, using a screwdriver.
bottom panel
back panel
Page 3 of 7