CB2 KICKSTAND Інструкція з монтажу Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень CB2 KICKSTAND. CB2 KICKSTAND 7 сторінок. Bookshelf
Друкувати сторінку
kickstand
NOTE: Do not over tighten the cam screws
top panel
Insert 4 cam screws into top panel as shown.
Secure, but do not over tighten, with a phillips
3
head screwdriver.
left side panel
top panel
Fit dowel of left and right side panels into top
panel. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
5
screw.
Made in Taiwan - r05
BOOKSHELF
NOTE: Make sure grooves
of side panels and top panel
are assembled on the same
side
right side panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Make sure arrows
on each cam point towards
nearest edge with holes
left and right side
panels
Insert 2 large cams and 2 wood dowels into
right and left side panels as shown. Make sure
arrows on each cam point towards nearest edge
4
with holes.
B
A
A. Insert back panel into grooves of assembly.
B. Attach bottom panel to assembly with 4
6
large screws, using a screwdriver.
bottom panel
back panel
Page 3 of 7