CB2 MONOLITH 조립 지침 매뉴얼 - 페이지 10
{카테고리_이름} CB2 MONOLITH에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 MONOLITH 13 페이지. Wardrobe
CB2 MONOLITH에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지)
페이지 인쇄
monolith
large fixed
shelf
Fit dowels of assembly into corresponding holes
of base, and secure with 2 bolts, 2 spring
washers and 2 flat washers, using a screw-
5
driver. Do not over tighten the bolts.
With assistance of another adult, position
assembly on its left side as shown. Fit back
panel into corresponding grooves of base and
7
left side panel as shown.
Made in Vietnam - r06
WARDROBE (RIGHT)
NOTE: Do not over
tighten the bolts
partition
small fixed
shelf
base
back panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
left side
panel
A
B
base
A. Fit dowels and cam screws of left side panel
into corresponding holes of assembly as shown.
Secure cams.
B. Secure base to left side panel with 2 bolts, 2
spring washers and 2 flat washers, using a
6
screwdriver. Secure cam.
B
A. Fit dowels and cam screws of right side
panel into corresponding holes of assembly.
Secure cams.
B. Secure base to right side panel with 2 bolts,
2 spring washers and 2 flat washers. Secure
8
cam.
B
large fixed
shelf
small fixed
shelf
right side
panel
A
partition
B
Page 3 of 6