CB2 MONOLITH 조립 지침 매뉴얼 - 페이지 9

{카테고리_이름} CB2 MONOLITH에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CB2 MONOLITH 13 페이지. Wardrobe
CB2 MONOLITH에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (6 페이지)

페이지 인쇄
CB2 MONOLITH 조립 지침 매뉴얼
monolith
NOTE:  Make sure arrows
of each cam points towards
nearest edge with holes
A
large fixed
shelf
B
small fixed
shelf
A. Insert 4 cams into large fixed shelf as
shown. Make sure arrows of each cam points
towards nearest edge with holes.
B. Insert 4 cams into small fixed shelf as
1
shown.
A. Insert 2 cams into base as shown.
B. Insert 2 cam screws into top panel as
3
shown.
Made in Vietnam - r06
WARDROBE (RIGHT)
A
base
B
top panel
Customer Service 800.606.6252  |  Latest instructions available at www.cb2.com
NOTE: Do not
over tighten the
cam screws
B
partition
A. Insert 10 wood dowels and 5 cam screws
into right and left side panels as shown, using
a phillips head screwdriver. Do not over
tighten the cam screws.
B. Insert 12 wood dowels, 8 cam screws, 2
2
cams into partition as shown.
small fixed
shelf
partition
large fixed
shelf
Fit 2 small fixed shelves and 2 large fixed
shelves onto corresponding dowels of partiton
as shown. Using a screwdriver, turn each cam
4
clockwise until it securely engages each cam
screw.
A
left and right
side panels
Page 2 of 6