CBC EN7-S02T 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} CBC EN7-S02T에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CBC EN7-S02T 11 페이지.

Installation

Install the device on the gate:

Open a hole with a diameter of D = 35mm on the gate, and the

recommend- ed position is 1/3 to 1/4 from the entrance end;

Insert the equipment mounting bracket into the opening of the

gate and fix the equipment nut from the inside of the gate;

Adjust the device to a suitable angle (angle between 5°C -15°C

vertical).

Boot：

According to the introduction of the wire interface, connect the device to

the network and power on the device.

Note: The temperature sensing system needs to be warmed up each

time the device is turned on. It is recommended to use the device for

face recognition after the words

learning" and "Recommended for use after warming up!"

"Temperature sensing intelligent

disappears.