CBC EN7-S02T Hızlı Başlangıç Kılavuzu - Sayfa 4

Termal kameralar CBC EN7-S02T için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CBC EN7-S02T 11 sayfaları.

Installation

Install the device on the gate:

Open a hole with a diameter of D = 35mm on the gate, and the

recommend- ed position is 1/3 to 1/4 from the entrance end;

Insert the equipment mounting bracket into the opening of the

gate and fix the equipment nut from the inside of the gate;

Adjust the device to a suitable angle (angle between 5°C -15°C

vertical).

Boot：

According to the introduction of the wire interface, connect the device to

the network and power on the device.

Note: The temperature sensing system needs to be warmed up each

time the device is turned on. It is recommended to use the device for

face recognition after the words

learning" and "Recommended for use after warming up!"

"Temperature sensing intelligent

disappears.