Datalogic Viper CE Cradle 사용자 설명서 - 페이지 11

{카테고리_이름} Datalogic Viper CE Cradle에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datalogic Viper CE Cradle 18 페이지.

INSTALLATION

2.2

INSTALLING DEVICE DRIVERS ON PC

To guarantee a correct RS232 or USB connection between the host and the

Viper™CE terminal through the Viper™CE cradle, the related drivers have to be

installed.

In order to install the RS232 driver, it is necessary to have at least the following:

PC with a Pentium processor;

One of the following operating systems:

Windows 2000

Windows XP

For the USB driver installation, it is necessary to have at least the following:

PC with a Pentium processor;

One of the following operating systems:

Windows 98

Windows ME

Windows 2000

Windows XP

Once the RS232/USB driver has been installed, the communication

between PC and cradle will be performed through a virtual Infrared

port.

NOTE

2.2.1

The following procedure allows installing the RS232 driver on the PC. In particular,

the PC is configured to handle the cradle as an infrared port.

Before performing the installation, ensure that the Viper™CE cradle has already

been connected to the PC serial port.

Start the "Add/Remove Hardware Wizard" in the PC Control Panel: