Datalogic Viper CE Cradle Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Estação de ancoragem Datalogic Viper CE Cradle. Datalogic Viper CE Cradle 18 páginas.

INSTALLATION

2.2

INSTALLING DEVICE DRIVERS ON PC

To guarantee a correct RS232 or USB connection between the host and the

Viper™CE terminal through the Viper™CE cradle, the related drivers have to be

installed.

In order to install the RS232 driver, it is necessary to have at least the following:

PC with a Pentium processor;

One of the following operating systems:

Windows 2000

Windows XP

For the USB driver installation, it is necessary to have at least the following:

PC with a Pentium processor;

One of the following operating systems:

Windows 98

Windows ME

Windows 2000

Windows XP

Once the RS232/USB driver has been installed, the communication

between PC and cradle will be performed through a virtual Infrared

port.

NOTE

2.2.1

The following procedure allows installing the RS232 driver on the PC. In particular,

the PC is configured to handle the cradle as an infrared port.

Before performing the installation, ensure that the Viper™CE cradle has already

been connected to the PC serial port.

Start the "Add/Remove Hardware Wizard" in the PC Control Panel: