Datapath VisionLC-HD 사용자 설명서 - 페이지 9

{카테고리_이름} Datapath VisionLC-HD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath VisionLC-HD 15 페이지. Dual and single channel live capture cards
Datapath VisionLC-HD에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄

Firmware Upgrades

All cards in the VisionLC range allow firmware upgrades to be completed on site rather than returning the card to Datapath.

the J4 Link MUST BE FITTED on the card.

Whenever a firmware upgrade is performed,

To perform the upgrade, follow the step-by-step instructions provided by the upgrade application.

In the unlikely event that something goes wrong during the upgrade process (e.g. System power outage) it is possible to revert

to the factory settings by powering down the system, temporarily removing the

link then powering up the system with the

link removed. Once the system has rebooted, replace the

link (whilst the system is powered up) and restart the firmware

upgrade process.

It should be noted that the latest driver installation program includes an automatic firmware update, if required. Therefore,

prior to installing the application and driver, ensure that J4 link is fitted.