DUUN PT280 사용 설명서 - 페이지 14

{카테고리_이름} DUUN PT280에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DUUN PT280 18 페이지.

Propeller towers and angles in the reservoir

The sketch is indicated with the maximum extent of the top brace and the tower perpendicular to

the slurry pit.

This gives the maximum allowable angle on the power transmission shaft between the propeller

and the tower, it is recommended to angle the tower to distribute the angular impact between the

shafts when stirring deep in the reservoir.

The maximum angle in point 1 on the sketch is 27 degrees and in point 2 14 degrees.

At distances of less than 1m to the bottom / wall, the stirring effect is lost, it is therefore

recommended to keep a longer distance. This also results in less stress on the junctions in the

power transmission shaft.