Datapath IQS4 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} Datapath IQS4에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath IQS4 8 페이지. 6u rack shelf
Datapath IQS4에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 빠른 시작 매뉴얼 (3 페이지)

페이지 인쇄

Connect both rack power supplies to the mains using the supplied mains leads.

Switch the power on.

Check the two LED indicators on the front are working. Both lights should appear on. Note: under normal circumstances

both the 'power' and 'backup power' lights should be on, indicating that the system is in dual redundant mode and backup

power is available. If only one working power supply is detected, then only the primary power LED will be lit up.

On the rear of the unit, check that both the PSUs are working. Both LEDs should appear on.

Place the rack

front cover

back on.