Datapath IQS4 Montaj Talimatları Kılavuzu - Sayfa 7
Medya Dönüştürücü Datapath IQS4 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Datapath IQS4 8 sayfaları. 6u rack shelf
Ayrıca Datapath IQS4 için: Kullanıcı Kılavuzu (16 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)
Sayfayı Yazdır
12
Connect both rack power supplies to the mains using the supplied mains leads.
13
Switch the power on.
14
Check the two LED indicators on the front are working. Both lights should appear on. Note: under normal circumstances
both the 'power' and 'backup power' lights should be on, indicating that the system is in dual redundant mode and backup
power is available. If only one working power supply is detected, then only the primary power LED will be lit up.
15
On the rear of the unit, check that both the PSUs are working. Both LEDs should appear on.
16
Place the rack
front cover
back on.
7