Dataprobe iBoot 사용 설명서 - 페이지 11
{카테고리_이름} Dataprobe iBoot에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot 16 페이지. Web enabled remote power control
Dataprobe iBoot에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)
페이지 인쇄
iBoot
Page 11
Web Browser Operation
Password Protection:
Open your browser and access iBoot by entering the default
(192.168.1.254) or current IP address into your browser's
Address window. Upon connection to iBoot, a password is
required. A username is not required.
The default Password is PASS. This can be changed from the
setup screen. Remember your password.
iBoot also uses an inactivity timer for security. When there is no
activity for 2 minutes, the connection is closed and the password
will need to be entered again for access.
Main Screen
Once the password is entered, the following page is displayed.
Location ID
Power Status
Action
Buttons
Power Cycle
Time
Auto Ping
Click for
Setup
To control the power, click on the appropriate button. During
power cycling, the Power Status bar will indicate the temporary
status, with a blue background. Once the cycle is complete, the
status bar will revert to its original condition. To abort a power
cycle, click on either Power On or Power Off buttons. iBoot will
immediately assume the status selected.