Dataprobe iBoot Instruction Manual - Page 11

Browse online or download pdf Instruction Manual for Switch Dataprobe iBoot. Dataprobe iBoot 16 pages. Web enabled remote power control
Also for Dataprobe iBoot: Manual (20 pages)

Print Page
Dataprobe iBoot Instruction Manual
iBoot
Page 11

Web Browser Operation

Password Protection:
Open your browser and access iBoot by entering the default
(192.168.1.254) or current IP address into your browser's
Address window. Upon connection to iBoot, a password is
required. A username is not required.
The default Password is PASS. This can be changed from the
setup screen. Remember your password.
iBoot also uses an inactivity timer for security. When there is no
activity for 2 minutes, the connection is closed and the password
will need to be entered again for access.
Main Screen
Once the password is entered, the following page is displayed.
Location ID
Power Status
Action
Buttons
Power Cycle
Time
Auto Ping
Click for
Setup
To control the power, click on the appropriate button. During
power cycling, the Power Status bar will indicate the temporary
status, with a blue background. Once the cycle is complete, the
status bar will revert to its original condition. To abort a power
cycle, click on either Power On or Power Off buttons. iBoot will
immediately assume the status selected.