Dataprobe iBoot-PoE 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Dataprobe iBoot-PoE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot-PoE 3 페이지. 1g poe extender with auto reboot

LED Displays



NET IN



PoE OUT

Discover and Set the IP Address

If your network supports DHCP, the IP address of the iBoot will be automatically

assigned. Find the IP Address of the iBoot using either from the DHCP Router/Server

or use the Dataprobe Device Management Utility (DMU), available at

dataprobe.com/support-iboot-poe

See Page 3 for more in the DMU.

Web Browser PoE Power Control

Factory Default IP Address:

Factory Default Security Credentials:

Point your browser to the IP Address of the iBoot-PoE, and then enter the

Administrator Username and Password. Once the user is validated, the Control and

Status is displayed.

To control the power, click on the appropriate button. During power cycling, the

Power Status bar will indicate the temporary status, with a blue background. Once

the cycle is complete, the status bar will revert to its original condition.

iBoot-PoE-P Quick Start Guide

Power is received by the iBoot-PoE from the PSE.

Power is delivered to the Controlled Device (PD).

V180802N

DHCP Set or 192.168.1.254

User: admin Password: admin