Dataprobe iBoot-PoE 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Dataprobe iBoot-PoE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot-PoE 3 페이지. 1g poe extender with auto reboot

Changing the IP Address

Device Management Utility

Obtain the Device Management Utility (DMU) from Dataprobe's website at

dataprobe.com/support-iboot-poe

Open the DMU on a PC on the same physical network as the iBoot and select

Device > Discover to display the current IP Address of the iBoot.

Select Set > IP Address to change the address. The IP address can only be set

within the first two minutes of powering up the iBoot. The DMU will only work

with iBoots on the same physical subnets as the PC.

Complete instructions for the DMU are provided with the download, and in the full

iBoot-PoE

Manual.

Web Page Setup

From the home page, click on

Setup,

and

Network. Enter the new

IP Address, Subnet Mask

and Gateway, then click

Save. Click the Reboot

button (or press the

reset button on the side of the unit to restart the iBoot-PoE with the new

settings. To lock the settings, select IP Mode = Static. If IP Mode remains

DHCP, the iBoot will obtain an address from a DHCP Server as soon as it finds

one.

The full manual covers all the automation and cloud control features

dataprobe.com/support-iboot-poe

iBoot-PoE-P Quick Start Guide

then

V180802N