Dataq Instruments DI-194RS 사용자 설명서 - 페이지 13
{카테고리_이름} Dataq Instruments DI-194RS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataq Instruments DI-194RS 18 페이지. 4-channel data acquisition module
페이지 인쇄3. Calibrating the DI-194RS
Serial Port Module
Your DI-194RS serial port module initially arrives in an uncalibrated state. You must perform this initial "fine tuning"
before recording waveforms to disk. Since this procedure requires a voltmeter, have it handy before starting.
With the DI-194RS serial port module installed and with W
lowing steps:
1.
Connect a wire between CH1 and GND on the DI-194RS serial port module.
2.
Select channel 1 by clicking the left mouse button in the channel's annotation margin. Channel 1 is enabled for
modifications when a box surrounds the "1=1" equality in the annotation margin.
3.
Click on Low Calibration... in the Edit menu. This displays the Low Calibration dialog box:
4.
Enter 0 (zero) in the Low Cal Value text box and click OK.
5.
Repeat steps 1 through 4 for channels 2, 3, and 4.
6.
Now connect a wire between CH1 and Dig1 on the DI-194RS serial port module.
7.
Using a voltmeter, measure and record the voltage between the CH1 and GND terminals.
D
/Lite recording software running, perform the fol-
IN
AQ
Calibrating the Instrument
5
DI-194RS User's Manual