Afag IRG 1-S 작동 및 설치 지침 번역 - 페이지 13

{카테고리_이름} Afag IRG 1-S에 대한 작동 및 설치 지침 번역을 온라인으로 검색하거나 PDF를 다운로드하세요. Afag IRG 1-S 14 페이지.

페이지 인쇄

1. Technical Data

5.2 Troubleshooting and fault repair

Table 2: Troubleshooting and fault repair

Fault:

Appliance not working

Conveyor not working

Conveyor vibrates too much, mag-

net knocking (noises)

Magnet heats up

6 Accessories

6.1 Fixture

Table 3: Order data

Type

Fixture

R02.1

Check the mains voltage, check the fuses and

replace if necessary.

Is the controller input set correctly, are the

jumpers correct?

Check whether the right oscillation frequency

has been set, where necessary alter the set-

ting.

Check the mains frequency (50/60 Hz). The

oscillation frequency and the mains voltage

must conform to one another.

trimmer setting too low, set U

max

Incorrect oscillation frequency setting. CAU-

TION! Magnet may have been destroyed by

overheating, or mechanically damaged by

knocking against something.

trimmer setting too high, reset U

max

necessary.

Incorrect mains voltage for magnet, check.

Incorrect oscillation frequency set, reset if

necessary.

Designation

for 1 IRG

for 2 IRG

for 1 IRG extended

for 2 IRG extended

04/03/2020

Fault repair

max

Order number

50450178

50450179

50450145

50450147

max

Page 13