DV8 OFFROAD SPBR-05 설치 매뉴얼 - 페이지 10

{카테고리_이름} DV8 OFFROAD SPBR-05에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DV8 OFFROAD SPBR-05 12 페이지. Trailing arm skid plate

INSTALLATION

MANUAL

STEP 14 |

Slide the bracket over the

mounting bolt for the control arm and let

it hang as low as possible while swinging

it around the opposite edge of the control

arm mount.

It should go into place with relative ease,

but may require some force to get it

seated on the mount properly.

STEP 15 |

Swing the plate up to hug

the frame rails, and push the bolt back

through slightly, allowing the skid to hang

from the bolt.

If the bolt does not move freely, add more

tension to the strap or use a prybar on

the backside using the gastank skid for

leverage.

STEP 16 |

Have a friend hold the

plate into place or use a jack/stand to

keep the two upper mounting holes

aligned.

One at a time, hold the provided spacer

and then push one bolt through to hold

the spacer. Repeat for the second bolt,

then slide the nut plate and hand thread

each hardware to the nut plate.

Note: An extra pair of hands to hold the

855-680-9595

NEED HELP?