DV8 OFFROAD SPBR-05 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe DV8 OFFROAD SPBR-05. DV8 OFFROAD SPBR-05 12 stron. Trailing arm skid plate

Drukuj stronę

INSTALLATION

MANUAL

STEP 14 |

Slide the bracket over the

mounting bolt for the control arm and let

it hang as low as possible while swinging

it around the opposite edge of the control

arm mount.

It should go into place with relative ease,

but may require some force to get it

seated on the mount properly.

STEP 15 |

Swing the plate up to hug

the frame rails, and push the bolt back

through slightly, allowing the skid to hang

from the bolt.

If the bolt does not move freely, add more

tension to the strap or use a prybar on

the backside using the gastank skid for

leverage.

STEP 16 |

Have a friend hold the

plate into place or use a jack/stand to

keep the two upper mounting holes

aligned.

One at a time, hold the provided spacer

and then push one bolt through to hold

the spacer. Repeat for the second bolt,

then slide the nut plate and hand thread

each hardware to the nut plate.

Note: An extra pair of hands to hold the

855-680-9595

NEED HELP?