Auspex Fire 매뉴얼 - 페이지 13
{카테고리_이름} Auspex Fire에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Auspex Fire 16 페이지.
페이지 인쇄Clips
Pipe clips should be installed so that the pipe can move
freely. Plastic system clips are available, however if using a
non-propriety clipping system, they must be non-metallic
where in contact with the pipe. General cable ties are not
recommended. Any damage caused by non-propriety clips
will not be covered by warranty. Neutral Cure silicon is
permitted in AS/NZS 3500 to protect pipes through
penetrations.
Recommended support spacings:
Diameter
20mm
25mm
32mm
DuoPEX Water System
The DuoPEX Water system is ideal for any large bore piping
required within the 101D project, with 40mm, 50mm and
63mm available. DuoPEX Water offers the versatility and
ease of a WaterMark certified multi-layer pipe system and
can be used in potable water and various other installations.
Advantages of the DuoPEX Water System
1.
Form stability during installation, for example in a curve
2.
Low thermal conductivity level
3.
Light weight during transport and installation
4.
Thermal expansion is lower than that of other pipes
5.
Lower pressure loss thanks to the smooth inner layer
6.
Suitable for Hydronic Heating
DuoPEX Water Fittings
DuoPEX Water fittings are manufactured from dezincification
resistance (DR) brass with a stainless steel crimp ring and
joined to the pipe using a specific precision crimping tool.
DuoPEX Water fittings are available in a full range of
couplings, elbows, tees and conversion fittings.
Horizontal
700mm
750mm
850mm
For the full range of DuoPEX
Water Fittings, pickup a copy
of the DuoPEX Water Manual
in your closest Reece store or
download a digital copy from
www.auspex.com.au
Vertical
1400mm
1500mm
1700mm
Auspex Fire Manual
|
11