Auspex Fire Manuel - Sayfa 13

Güvenlik Ekipmanları Auspex Fire için çevrimiçi göz atın veya pdf Manuel indirin. Auspex Fire 16 sayfaları.

Sayfayı Yazdır

Clips

Pipe clips should be installed so that the pipe can move

freely. Plastic system clips are available, however if using a

non-propriety clipping system, they must be non-metallic

where in contact with the pipe. General cable ties are not

recommended. Any damage caused by non-propriety clips

will not be covered by warranty. Neutral Cure silicon is

permitted in AS/NZS 3500 to protect pipes through

penetrations.

Recommended support spacings:

Diameter

20mm

25mm

32mm

DuoPEX Water System

The DuoPEX Water system is ideal for any large bore piping

required within the 101D project, with 40mm, 50mm and

63mm available. DuoPEX Water offers the versatility and

ease of a WaterMark certified multi-layer pipe system and

can be used in potable water and various other installations.

Advantages of the DuoPEX Water System

Form stability during installation, for example in a curve

Low thermal conductivity level

Light weight during transport and installation

Thermal expansion is lower than that of other pipes

Lower pressure loss thanks to the smooth inner layer

Suitable for Hydronic Heating

DuoPEX Water Fittings

DuoPEX Water fittings are manufactured from dezincification

resistance (DR) brass with a stainless steel crimp ring and

joined to the pipe using a specific precision crimping tool.

DuoPEX Water fittings are available in a full range of

couplings, elbows, tees and conversion fittings.

Horizontal

700mm

750mm

850mm

For the full range of DuoPEX

Water Fittings, pickup a copy

of the DuoPEX Water Manual

in your closest Reece store or

download a digital copy from

www.auspex.com.au

Vertical

1400mm

1500mm

1700mm

Auspex Fire Manual