dvblogic TF-MFD3 매뉴얼 - 페이지 5
{카테고리_이름} dvblogic TF-MFD3에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dvblogic TF-MFD3 5 페이지. Tv-free video-in-motion interface for volkswagen mfd3/rns510, skoda columbus and seat trinax navigation systems
페이지 인쇄
3. Activation of the video-in-motion function
The video-in-motion can be activated and deactivated by Dip 1 or alternatively by the
included loose green cable in connection with a switch (not included in delivery).
Video-in-motion permanent
With dip1 to ON the video-in-motion function is activated permanently without disturbing
the navigation performance.
Video-in-motion selective
With dip1 to OFF the included green cable is used to activate the video-in-motion function.
Connect a switch to the green cable and connect the green cable to +12V ACC.
●
+12V
= TV-Free is activated
●
0V
= TV-Free is not activated
Note: The loose white cable is not required and must be isolated.
4. Specifications
Operation voltage
Stand-by power drain
Operation power drain
Power consumption
Temperature range
Weight
Measurements (box only) W x H x D 76 x 27 x 54 mm
Version 29.01.2013
10.5 – 14.8V
<2mA
~60mA
~0,08W
-30°C to +80°C
44g
TF-MFD3