DVC 5320 설치, 운영 및 유지보수 매뉴얼 - 페이지 8

{카테고리_이름} DVC 5320에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVC 5320 12 페이지. Mechanical limit switch box

TYPE 5320

Insert the shaft of the limit switch box correctly into the drive slot on the top of the actuator drive

shaft – use correctly sized high tensile bolts and spring washers for fastening the box to the bracket.

4.4 Adjustment of the limit switch box

By use of screw driver loosen the captive bolt on the cover and lift off top cover.

Each switch has its own independent cam arrangement. Follow the procedures bellow for

adjustment.

Lift the bottom cam up and turn it until the switch is activated (clicks) – then release the cam.

The spring will force the cam back into the splines on the shaft ensuring the correct position

of the cam.

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Lift up and release

I O M . U K . D V C . 5 3 2 0 . 3 0 0 6 1 5 - R E V . B

PAGE 8