DVC 5320 설치, 운영 및 유지보수 매뉴얼 - 페이지 6

{카테고리_이름} DVC 5320에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVC 5320 12 페이지. Mechanical limit switch box

TYPE 5320

3.4 Dimensions

Verify that the nameplate of the limit switch box match the specifications needed – correct model

number, voltage and enclosure type - before installation and use.

 Wiring connections should be in accordance with the diagram attached to the inside of the

top casing cover.

 The two conduit cable entries shall be sealed in a proper manner until cable works is

finalized.

 Position indicator and switch box covers are sealed by use of o-rings. Please take care of o-

ring in order not to cause any damage to the o-rings during disassembly or reassembly.

 The position of the limit switches / cams have not been adjusted at the factory. Therefore a

final adjustment of those is needed before use.

 Do not use in areas where explosion proof equipment is required. These types of limit

switches are designed as weatherproof types – not explosion proof types.

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

I O M . U K . D V C . 5 3 2 0 . 3 0 0 6 1 5 - R E V . B

PAGE 6