DVDO iScan Duo 빠른 시작 매뉴얼 - 페이지 3
{카테고리_이름} DVDO iScan Duo에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DVDO iScan Duo 3 페이지. Dual output high-definition video processor
DVDO iScan Duo에 대해서도 마찬가지입니다: 사용 설명서 부록 (15 페이지), 소유자 매뉴얼 (16 페이지)
페이지 인쇄
Troubleshooting
1. What should I do if my iScan Duo is not functioning correctly?
Restore the iScan Duo to its factory default state.
a. Using the remote control:
•
Press the MENU button
•
Press the
button until the FPD shows Confi guration
•
Press ENTER
•
Press the
button until the FPD shows Factory Defaults
•
Press ENTER
•
Press the
button until the FPD shows All Defaults
•
Press ENTER
•
Press the
button to select Yes
•
Press ENTER
The iScan Duo will be restored to its factory default state.
b. Using the buttons on the front panel:
•
Apply power to the iScan Duo
•
Press the MENU, EXIT and POWER buttons simultaneously until
the FPD shows Factory Default — Please wait . . .
2. Why is the blue Status LED blinking on the front panel
of my iScan Duo?
The Status LED on the iScan Duo will blink blue if it is processing an HDCP
protected signal on its HDMI inputs and it is unable to authenticate with
the display. Verify that your display is HDCP-compliant. If your display
is not HDCP-compliant then you will need to use the analog connections
from your source. If your display is HDCP compliant, check your cabling
and try new cables, if possible, or try cycling the power on your display or
HDCP source to force reauthentication between your display and source.
3. Will I lose the settings on my iScan Duo if I update the
software version?
The iScan Duo will typically not lose its settings after performing a soft-
ware update. DVDO will inform users if a software update will erase the
iScan Duo's settings. Please take note of your settings before updating
your software.
Questions?
Contact us directly at help
866.423.DVDO
(Monday - Friday, 9 am to 5 pm PST)
www.dvdo.com
dvdo.com or by phone at:
@