AUSSIE TONNEAU ATB01030 설치 지침 매뉴얼

{카테고리_이름} AUSSIE TONNEAU ATB01030에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSSIE TONNEAU ATB01030 6 페이지. Ford ranger px single cab with headboard

TONNEAU INSTALLATION INSTRUCTIONS

FORD RANGER PX SINGLE CAB WITH HEADBOARD (CHECK IMAGE)

BASIC TOOLS REQUIRED

Rivet gun, Drill, 4.5mm Drill bit, Measuring tape, Silicon sealant, Anti-corrosive primer.

CONTENTS

1 x Tonneau cover

4 x Bar Brackets

18 x Buttons

4 x Pieces of dowel

1 x Seal Template

(Some parts in the fitting kit may not be required. All fitting kits are weighed to ensure accurate quantities.)

1. INSTALLATION PROCEDURE

THE HEADBOARD ON THIS VEHICLE WAS CHANGED IN MAY 2013.

PLEASE REFER TO THE IMAGE BELOW TO CONFIRM THE

HEADBOARD ON THE VEHICLE MATHCES THE IMAGE ON THE RIGHT HAND SIDE.

JUNE 2013 – CURRENT

PART NUMBER: ATB01030

3 x Aluminium rope track (476mm)

2 x Tonneau support bar

35 x Rivets

1 x Seal Tape

1 x Fitting Instruction

– IMPORTANT –