AUSSIE TONNEAU ATB01030 Installation Instructions Manual
Browse online or download pdf Installation Instructions Manual for Automobile Accessories AUSSIE TONNEAU ATB01030. AUSSIE TONNEAU ATB01030 6 pages. Ford ranger px single cab with headboard
Print Page
TONNEAU INSTALLATION INSTRUCTIONS
FORD RANGER PX SINGLE CAB WITH HEADBOARD (CHECK IMAGE)
BASIC TOOLS REQUIRED
-
Rivet gun, Drill, 4.5mm Drill bit, Measuring tape, Silicon sealant, Anti-corrosive primer.
CONTENTS
1 x Tonneau cover
4 x Bar Brackets
18 x Buttons
4 x Pieces of dowel
1 x Seal Template
(Some parts in the fitting kit may not be required. All fitting kits are weighed to ensure accurate quantities.)
1. INSTALLATION PROCEDURE
THE HEADBOARD ON THIS VEHICLE WAS CHANGED IN MAY 2013.
PLEASE REFER TO THE IMAGE BELOW TO CONFIRM THE
HEADBOARD ON THE VEHICLE MATHCES THE IMAGE ON THE RIGHT HAND SIDE.
JUNE 2013 – CURRENT
PART NUMBER: ATB01030
3 x Aluminium rope track (476mm)
2 x Tonneau support bar
35 x Rivets
1 x Seal Tape
1 x Fitting Instruction
– IMPORTANT –