AUSSIE TONNEAU ATB01152 피팅 지침 - 페이지 4
{카테고리_이름} AUSSIE TONNEAU ATB01152에 대한 피팅 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSSIE TONNEAU ATB01152 4 페이지. Tonneau cover to suit triple m 2400 x 1712mm
페이지 인쇄hollow bar onto the solid ends. This is where you will drill a hole to the depth of about 1-2mm
(do not go any further)
2. Join the pieces back together and screw grub screws through the hollow bar into the holes
that you drilled. Make sure you do not over tighten the grub screws. Refit the bar. You may
kink the bar in the middle to give it some extra height to assist with water runoff.