AUSSIE TONNEAU ATB01152 Fitting Instruction - Page 4

Browse online or download pdf Fitting Instruction for Automobile Accessories AUSSIE TONNEAU ATB01152. AUSSIE TONNEAU ATB01152 4 pages. Tonneau cover to suit triple m 2400 x 1712mm

Print Page

hollow bar onto the solid ends. This is where you will drill a hole to the depth of about 1-2mm

(do not go any further)

2. Join the pieces back together and screw grub screws through the hollow bar into the holes

that you drilled. Make sure you do not over tighten the grub screws. Refit the bar. You may

kink the bar in the middle to give it some extra height to assist with water runoff.