Datavideo DAC-100 시작하기 - 페이지 4

{카테고리_이름} Datavideo DAC-100에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-100 15 페이지. Important note to make dac-2/dac-100 work with pinnacle dv500
Datavideo DAC-100에 대해서도 마찬가지입니다: 시작하기 (13 페이지), 보충 설명서 (13 페이지)

페이지 인쇄
Datavideo DAC-100 시작하기
4
1. Connect the S-Video cable and RCA audio cables from the VCR's Line output to the input on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac's FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100's Source Button to switch it to "AV" and the A Encode Button to "16 bit".
6. Go to the "Capture or Import" mode on the Editing software to begin capturing video to a PC or a MAC.
SOURCE
A ENCODE
CAPTURING
PRESS
Set to "AV"
PRESS
Set to "16 bit"
S-Video
FireWire to
PC/MAC