Datavideo DAC-100 시작하기 - 페이지 5

{카테고리_이름} Datavideo DAC-100에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-100 15 페이지. Important note to make dac-2/dac-100 work with pinnacle dv500
Datavideo DAC-100에 대해서도 마찬가지입니다: 시작하기 (13 페이지), 보충 설명서 (13 페이지)

페이지 인쇄
Datavideo DAC-100 시작하기
5
1. Connect the RCA Video/audio cables from the VCR's Line input to the output on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac's FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100's Source Button to switch it to "DV" and the A Encode Button to "16 bit".
6. Go to the "Export" mode on the Editing software to begin exporting video to the VCR.
EXPORTING TO
PUSH
Set to "16 bit"
PUSH
Set to "AV"