ADE M600020 운영 매뉴얼 - 페이지 9

{카테고리_이름} ADE M600020에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE M600020 16 페이지. Electronic bed scale

페이지 인쇄

Determining the Body Mass Index (BMI)

The BMI figure is an index showing the ratio between height and weight.

body weight

BMI=

(height)²

display. Use the numerical key pad to enter a new value for the height (in cm) or retain the value, which is

already been displayed. Confirm the value entered with the ENTER key or delete same by using the CLEAR

key. After the entry has been confirmed by the ENTER key, the BMI value will be calculated using the weight

on the scales. The display changes between weight value and BMI value "b xx.x" (every two seconds) for a

period of 3 minutes. Press the BMI key (11) to cancel before this time has expired.

Evaluating Body Mass Index

BMI evaluation according to WHO

BMI

18.5

BMI

18.5

BMI

Print out a record

The scales must be at standstill, e.g. standstill status display

Press the ENTER key (13) to send the data to the serial interface.

Note: Printing is not possible if the net weight is 0. The print function only produces one print-out. A reset is

required to print out another copy.

Cleaning

Remove the mains plug before cleaning the unit. Do not use any aggressive cleaning materials for cleaning;

only use a damp cloth or conventional disinfectant. Ensure that no liquids or any fluid gets into the scale.

Error messages

Error mes-

sage

Overload display

Overflow indicator (negative)

Overflow indicator (positive)

AD LOW

A/D above negative range

AD HI

A/D above positive range

M600020-210322-Rev008-UM-e

To determine this value you need the height of the person.

Start the scale and weigh the person following the steps under weighing. Then

press the BMI key (11) to start BMI mode. The last value entered appears on the

Severely underweight

Moderately underweight

Slightly underweight

Normal weight

Overweight

Obese Class I

Obese Class II

Obese Class III

Care, servicing and recalibration

Description

(14) appears at the screen.

Problem solution

Weight exceeds max. capacity of the

scales.

Negative weight indicated – weight too

low to be displayed (<=99999).

Positive weight indicated – weight too

high to be displayed (>=999999).

Check if the scales are correctly as-

sembled or if they are damaged.

Check if the scales are correctly as-

sembled or if they are damaged.