Datavideo AD-200 Main Unit 사용 설명서 - 페이지 11
{카테고리_이름} Datavideo AD-200 Main Unit에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo AD-200 Main Unit 14 페이지. Hd 12-channel ob van studio
Datavideo AD-200 Main Unit에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 사용 설명서 (17 페이지)
페이지 인쇄
2.
DELAY TIME
This function sets audio input delay time ranging from 0000~3000 mSEC.
3.
TONE MODE
FQ.: This function sets TONE frequency of 1KHz, 6KHz or 12 KHz
LEL: This function sets TONE level ranging from -48~+24 dBu.
4.
DISPLAY
BRI.: This function sets OLED panel brightness. There are five brightness levels with five filled square boxes being
the brightest and one filled square box being the least bright.
■■■■■
BRI. =
Brightest
TEST: Different colours (Red, Green, Blue, Black and White) are available for testing OLED panel.
DIM: The OLED panel dims after the device is idle for 10 seconds. There are four dim levels with four filled square
boxes being no dim and one filled square box being the most dim.
■■■■
DIM =
No Dim
RESET: This function resets all settings to factory default.
5.
SET GAIN
This function sets the maximum audio level gain (0, 6 or 12 dB) for CH1-6, OUTA/B and MNTR knobs.
MAX GAIN
CH1: +00 dB
CH2: +06 dB
CH3: +12 dB
CH4: +00 dB
System Diagram
■ - - - -
BRI. =
Least Bright
■ - - -
DIM =
Most Dim
- 11 -