Datavideo AD-200 Main Unit 사용 설명서 - 페이지 9

{카테고리_이름} Datavideo AD-200 Main Unit에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo AD-200 Main Unit 14 페이지. Hd 12-channel ob van studio
Datavideo AD-200 Main Unit에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 사용 설명서 (17 페이지)

페이지 인쇄
Datavideo AD-200 Main Unit 사용 설명서

Control Unit (Rear Panel)

Connection
Use D-SUB Cable to connect AD-200 main unit to AD-200 control unit.
Audio Input
Audio input of control unit must be connected to audio output of main unit via a connected cable.
DC IN Socket
Connect the supplied 12V PSU to this socket. The power connection can be secured by screwing
the outer fastening ring of the DC In plug to the socket.
Note: AD-200 main unit and AD-200 control unit both have DC IN Socket, they are the same
function, you just need select one socket to supply the power input.
Grounding Terminal
When connecting this unit to any other component, make sure that it is properly grounded by
connecting this terminal to an appropriate point. When connecting, use the socket and be sure to
2
use wire with a cross-sectional area of at least 1.0 mm
.
- 9 -