Datavideo DAC-200 시작하기 - 페이지 4

{카테고리_이름} Datavideo DAC-200에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-200 13 페이지. Important note to make dac-200 work with pinnacle dv500:
Datavideo DAC-200에 대해서도 마찬가지입니다: 참조 매뉴얼 (1 페이지), 설치 매뉴얼 (16 페이지), 중요 참고 사항 (9 페이지)

페이지 인쇄

1. Connect the S-Video cable and RCA audio cables from the VCR's Line output to the input on the DAC-100.

2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac's FireWire Port.

3. Power on the DAC-100 and the VCR.

4. Start the Editing Software. (Not Supplied)

5. Press the DAC-100's Source Button to switch it to "AV" and the A Encode Button to "16 bit".

6. Go to the "Capture or Import" mode on the Editing software to begin capturing video to a PC or a MAC.

SOURCE

A ENCODE

CAPTURING

PRESS

Set to "AV"

PRESS

Set to "16 bit"

S-Video

FireWire to

PC/MAC