Datavideo DAC-200 Başlarken - Sayfa 4

Anahtar Datavideo DAC-200 için çevrimiçi göz atın veya pdf Başlarken indirin. Datavideo DAC-200 13 sayfaları. Important note to make dac-200 work with pinnacle dv500:
Ayrıca Datavideo DAC-200 için: Referans Kılavuzu (1 sayfalar), Kurulum Kılavuzu (16 sayfalar), Önemli Notlar (9 sayfalar)

Sayfayı Yazdır
Datavideo DAC-200 Başlarken
4
1. Connect the S-Video cable and RCA audio cables from the VCR's Line output to the input on the DAC-100.
2. Connect the FireWire cable to the DAC-100, connect the opposite end to the PC or Mac's FireWire Port.
3. Power on the DAC-100 and the VCR.
4. Start the Editing Software. (Not Supplied)
5. Press the DAC-100's Source Button to switch it to "AV" and the A Encode Button to "16 bit".
6. Go to the "Capture or Import" mode on the Editing software to begin capturing video to a PC or a MAC.
SOURCE
A ENCODE
CAPTURING
PRESS
Set to "AV"
PRESS
Set to "16 bit"
S-Video
FireWire to
PC/MAC