Datavideo DAC-200 설치 매뉴얼 - 페이지 12
{카테고리_이름} Datavideo DAC-200에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo DAC-200 16 페이지. Important note to make dac-200 work with pinnacle dv500:
Datavideo DAC-200에 대해서도 마찬가지입니다: 시작하기 (13 페이지), 참조 매뉴얼 (1 페이지), 중요 참고 사항 (9 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. Warnings and Precautions
- 3. Warranty
- 4. Disposal
- 5. FCC & CE Certification (Radio & Television Interference)
- 6. What's in the Box
- 7. Key Features
- 7. Front Panel Control/Connection
- 7. Rear Panel Control/Connection
- 8. Operation Procedure
- 8. DIP Switch Settings
- 9. Installation / Connections
- 10. Connecting a PC / MAC NLE System to an Analogue VCR
- 11. Specification
- 12. Service & Support
Dip Switch settings to work with Windows & MAC Operation system
The DAC200 uses dip switches 4 and 5 to control the clocking frequency when it
is converting video, if the dip switches are not configured for your operating
system or type of device, a loss in video can occur. Please refer to dip switch
chart below and make sure that your DAC200 is setup correctly.
SMART DV is a patent pending feature that allows monitoring of the video during
a DV to DV capture.
Enabling SMART DV makes the converter transparent to an NLE system, while
still transcoding the live DV stream into analogue video. This enables users to
monitor a live digital video feed from a DV camcorder or DV deck during capture,
without any conflict. It means a huge saving of time for all video editors working
with DV tape.
NTSC System (USA)
MAC OS
NTSC System (USA)
Windows XP and Windows ME
PAL System (EU)
MAC OS
PAL System (EU)
Windows XP and Windows ME
NTSC System (USA)
Smart DV on
NTSC System (USA)
Camera
PAL System (EU)
Smart DV on
PAL System (EU)
Camera
11