Datavideo ITC-100 KF1000 사용 설명서 - 페이지 11
{카테고리_이름} Datavideo ITC-100 KF1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo ITC-100 KF1000 14 페이지. Patch panel
Datavideo ITC-100 KF1000에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 사용 설명서 (6 페이지)
페이지 인쇄
ITC-100 Tally Input - Pin Cross Reference
If you are using the ITC-100KF1000 with a Datavideo SE-1000 via a TB-10 you do
not need to worry about tally information, as it is automatically sent to the ITC-100
KF1000. If you are using the ITC-100 with other equipment the following tables
explain the pin configurations of Tally A and Tally B.
Contact closure between the relevant Pin number and ground will illuminate the LED.
For example on Tally A, if Pin 1 is connected to Pin 4 the RED LED will light up on
Channel 1; if Pin 13 is connected to Pin 4 the AMBER LED will light up on Channel 3
Tally A Input
The Tally A Input will send Tally Information to Channels 1 ~ 4. The following table
shows the pin numbers for each channel:
Video
Channel
1
2
3
AUX 1
Pins 4, 9 and 14 can be used as ground.
Tally B Input
The Tally B Input will send Tally Information to Channels 5 ~ 8. The following table
shows the pin numbers for each channel:
Video
Channel
4
5
6
AUX 2
Pins 4, 9 and 14 can be used as ground.
Red LED
LIVE
(On Air)
Pin 1
Pin 6
Pin 11
Pin 5
Red LED
LIVE
(On Air)
Pin 1
Pin 6
Pin 11
Pin 5
10
Amber LED
CUED
(Next)
Pin 3
Pin 8
Pin 13
Pin 15
Amber LED
CUED
(Next)
Pin 3
Pin 8
Pin 13
Pin 15