Datavideo ITC-100 KF1000 Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Перемикач Datavideo ITC-100 KF1000. Datavideo ITC-100 KF1000 14 сторінок. Patch panel
Також для Datavideo ITC-100 KF1000: Посібник користувача (16 сторінок), Інструкція з експлуатації (6 сторінок)
Друкувати сторінку
ITC-100 Tally Input - Pin Cross Reference
If you are using the ITC-100KF1000 with a Datavideo SE-1000 via a TB-10 you do
not need to worry about tally information, as it is automatically sent to the ITC-100
KF1000. If you are using the ITC-100 with other equipment the following tables
explain the pin configurations of Tally A and Tally B.
Contact closure between the relevant Pin number and ground will illuminate the LED.
For example on Tally A, if Pin 1 is connected to Pin 4 the RED LED will light up on
Channel 1; if Pin 13 is connected to Pin 4 the AMBER LED will light up on Channel 3
Tally A Input
The Tally A Input will send Tally Information to Channels 1 ~ 4. The following table
shows the pin numbers for each channel:
Video
Channel
1
2
3
AUX 1
Pins 4, 9 and 14 can be used as ground.
Tally B Input
The Tally B Input will send Tally Information to Channels 5 ~ 8. The following table
shows the pin numbers for each channel:
Video
Channel
4
5
6
AUX 2
Pins 4, 9 and 14 can be used as ground.
Red LED
LIVE
(On Air)
Pin 1
Pin 6
Pin 11
Pin 5
Red LED
LIVE
(On Air)
Pin 1
Pin 6
Pin 11
Pin 5
10
Amber LED
CUED
(Next)
Pin 3
Pin 8
Pin 13
Pin 15
Amber LED
CUED
(Next)
Pin 3
Pin 8
Pin 13
Pin 15