DVIGear DVI-3210a 사용자 설명서 - 페이지 7

{카테고리_이름} DVIGear DVI-3210a에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVIGear DVI-3210a 11 페이지. Vga to dvi scaler/converter

Note: Proper signal levels are very important to the operation of this product. If improper

operation of the unit occurs and the unit has power, the most likely cause of the problem is high

or low signal levels, use of a low quality cable, or the use of the wrong type of input cable.

4.3

Connecting Power to the Unit

This unit is shipped with an External AC Power Adapter that converts 100~240VAC@

50-60Hz to 5VDC. Connect the DC Output Cord from the Power Adapter to the back

of the unit and then plug the Power Adapter into an AC power receptacle. When AC

power is applied in this fashion, the Power LED indicator will illuminate.

5.0

OPERATING THE UNIT

5.1

On-Screen Menus

The DVI-3210a is controlled via three buttons with status indicated by an On-Screen

Display (OSD).

• Menu Button: This Button displays the Menu Options via the On-Screen

Display on the display device connected to the output.

• + and – Buttons: These Buttons allow navigation within the Menu and

adjustments of the parameters available.

• XGA Reset: Simultaneously depressing the – and + buttons returns

settings to factory defaults and sets the output to XGA@60 Hz.

Pressing the Menu Button results brings up the Main Menu. Move the cursor to

the desired setup option by using the + and – buttons. Press the Menu Button

again to call up that option.

Once the desired option is selected, a new Menu will appear. Once again use

the + & – Keys to select the parameter you wish to change or adjust.

DVI OUTPUT

DVI-3210a

INPUT SETUP

OUTPUT SETUP

PICTURE ADJ.

H V ADJUST

OSD ADJUST

SYSTEM INFO

AUTO ADJUST

EXIT

-5-

480p

XGA