DVIGear DVI-3210a 사용자 설명서 - 페이지 9

{카테고리_이름} DVIGear DVI-3210a에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DVIGear DVI-3210a 11 페이지. Vga to dvi scaler/converter

페이지 인쇄

5.5

Menu Ranges and Defaults

The adjustment range and factory preset values are as follows:

Value

Contrast

Bright

Color

Red

Green

Blue

Note: Select reset to restore all adjustments to factory default values.

H V

Adjust: When selected, the following sub-menu appears.

H-position

V-position

Use the + and – buttons to adjust the best horizontal and vertical position of the picture.

OSD Adjust:

When this mode is selected, you can adjust the Horizontal and

Vertical position of the OSD menu.

System Information:

their vertical refresh rate on the screen.

Auto Adjust:

When selected the DVI-3210a will automatically reset all adjustment

parameters to their factory default values.

Exit:

Select to exit from the current menu page.

Notes:

• The default output resolution of the DVI-3210a is XGA@60 Hz.

• The unit has non-volatile memory and memorizes all user settings before

Power OFF and recalls those settings on next Power ON; however,

changing output resolution erases all settings.

• At any time, pressing + and - buttons simultaneously will reset the output

resolution to XGA@60Hz, and forces all other settings back to factory

default values.

6.0

TROUBLESHOOTING

Other than checking for faulty cables, the most common problem is choosing an

incorrect Input or Output Setting. Make sure the display is capable of handling the

resolution and refresh rate selected. Also be sure to use the correct type of cable

for the input format selected (YPbPr or RGB mode).

Range

0~255

When selected, this shows the input/output resolutions and

84/184

30/32

-7-

Default Value

130

128