Datavideo RMC-180 사용 설명서 - 페이지 5
{카테고리_이름} Datavideo RMC-180에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo RMC-180 16 페이지. Ptz camera control unit
Datavideo RMC-180에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (16 페이지), 사용 설명서 (19 페이지)
페이지 인쇄
The Datavideo RMC-180 Controller can control up-to 4 Datavideo Pan Tilt Zoom (PTZ) cameras such as the
PTC-150.
That's Datavideo; sharing the value!
To get more value out of your equipment please take a few minutes to read through this manual. This will
help you to familiarise yourself with all the aspects of the RMC-180 CCU Controller unit.
Features
Remote control of up-to four Pan,Tilt and Zoom cameras
Pan,Tilt and Zoom with speed control by large joystick
Control of Pan, Tilt and Zoom as well as Iris, Focus, Gain, and other functions over Ethernet
Multiple preset for Pan, Tilt & Zoom for each individual camera
Full remote control of each camera via serial communication over affordable network cabling
Compatible with Datavideo's switcher tally indicators
Compact design for easy installation
Easy integration with Datavideo HD switchers for an affordable multi-camera solution.
Compatible Control Standards
Depending on your chosen PTZ camera(s) the following control standards are available.
Please note a firmware update may be required to switch your RMC-180 to the same protocol as the
camera you wish to control. All units are initially supplied with the VISCA protocol as this works with the
Datavideo PTC-150 camera.
SONY VISCA
Introduction
5