Datavideo RMC-180 사용 설명서 - 페이지 7

{카테고리_이름} Datavideo RMC-180에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo RMC-180 19 페이지. Ptz camera control unit
Datavideo RMC-180에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (16 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

Push Auto

Push once to automatically adjust the camera white

balance setting.

Manual

Push to enable manual white balance setting.

ATW

Force Automatic White Balance

Push to enable automatic white balance setting.

IRIS

To manually control the IRIS setting, first press the

AUTO/MANUAL button so the button LED is turned ON.

The IRIS dial can then be rotated to set the exposure.

If the AUTO/MANUAL button is disabled (OFF), the camera will

be in AUTO IRIS mode.

Channel A, B, C, D Buttons

To control or set up a connected camera, first select it by

pressing these buttons. The selected channel button will be

turned ON.

LOCK Button

When enabled, the joystick will be in the lock state. To resume

its functional status, simply press the button once to unlock the

joystick.

PTZ Joystick Control

Note: Before attempting to use the joystick to PAN, TILT or

ZOOM a selected camera, first make sure the LOCK button is not

enabled. If the LOCK button LED is ON, the joystick is locked;

press the LOCK button to unlock the joystick.

PAN – Move the joystick left or right to pan the selected PTZ

camera from left to right or vice versa.

TILT – Move the joystick up or down to tilt the selected PTZ

camera up or down.

ZOOM – Twist the joystick clockwise (to the right) or anti-

clockwise (to the left) to have the selected PTZ camera zoom in

or out.