Datavideo RMC-180 사용 설명서 - 페이지 8

{카테고리_이름} Datavideo RMC-180에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datavideo RMC-180 19 페이지. Ptz camera control unit
Datavideo RMC-180에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (16 페이지), 사용 설명서 (16 페이지)

페이지 인쇄

2.2

Rear Panel – Connections

Speed

The speed at which the selected camera moves can be chosen by

pressing one of the three speed buttons.

STR

Pressing this button enters the RMC-180 into STORE MODE.

When activated, this allows the current camera position to be

stored in a chosen Channel Memory Button. Press again to exit

STORE MODE.

Channel Memory Buttons

These buttons may be used to store up to four camera positions

for each camera. Each button corresponds to one stored camera

position. The activated button LED will be turned ON.

Tally Indicator LEDs

Each set of the four memory buttons is assigned a Tally Indicator

LED. This LED feature becomes active when the RMC-180 is

connected to the tally output of a compatible Datavideo

Switcher such as the HS-2000 or HS-2200.

When the HS-2000 or HS-2200 Switcher is sending camera A's

video to the program output, the RMC-180 CH A's tally LED will

be turned ON. Additional equipment and cabling are required.

Firmware Upgrade

USB type A port for connection to a computer during the

firmware upgrade process.