Datavideo RMC-180 Kullanım Kılavuzu - Sayfa 8

Kontrolör Datavideo RMC-180 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Datavideo RMC-180 19 sayfaları. Ptz camera control unit
Ayrıca Datavideo RMC-180 için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (16 sayfalar)

Sayfayı Yazdır

2.2

Rear Panel – Connections

Speed

The speed at which the selected camera moves can be chosen by

pressing one of the three speed buttons.

STR

Pressing this button enters the RMC-180 into STORE MODE.

When activated, this allows the current camera position to be

stored in a chosen Channel Memory Button. Press again to exit

STORE MODE.

Channel Memory Buttons

These buttons may be used to store up to four camera positions

for each camera. Each button corresponds to one stored camera

position. The activated button LED will be turned ON.

Tally Indicator LEDs

Each set of the four memory buttons is assigned a Tally Indicator

LED. This LED feature becomes active when the RMC-180 is

connected to the tally output of a compatible Datavideo

Switcher such as the HS-2000 or HS-2200.

When the HS-2000 or HS-2200 Switcher is sending camera A's

video to the program output, the RMC-180 CH A's tally LED will

be turned ON. Additional equipment and cabling are required.

Firmware Upgrade

USB type A port for connection to a computer during the

firmware upgrade process.