ADE ZW60-45 운영 매뉴얼 - 페이지 10
{카테고리_이름} ADE ZW60-45에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE ZW60-45 20 페이지. Electronic table scales
페이지 인쇄
6.7.1
Manual totaliser
The scale can be set so that the weight valueson the display are added to the values in the
totaliser by pressing the M+ button.
The display shows "AC 1" first and then the currently stored total weight for approx. 2
seconds before returning to the normal weighing mode.
If a printer or PC is connected via the RS232 interface (optional, not upgradeable), the result
will be output ac-cordingly.
Remove the applied weight.
As soon as the scale returns to zero position, a second weight can be applied.
Press the M+ button to add the value to the totaliser.
The display now shows "AC 2" first and then the currently stored total weight for approx. 2
seconds before re-turning to the normal weighing mode.
This process can be repeated until all weights have been added.
A total of 99 operations can be performed or until the rated capacity of the scale has been
reached.
When the weighing surface is unloaded and the display shows zero, press the MR button to
recall the stored value. Now the scale display shows the number of weights as "AC xx" and
the total weight before returning to zero.
The total weight may also be output to a connected printer or PC via the RS232 interface
(optional, not upgrade-able).
To clear the totaliser, press the MC button..
The M+ sum function is enabled only if the display shows "STABLE".
6.7.2
Automatic totaliser
The scale can be set so that the weight values on the display are automatically added to the
values in the totalis-er. For this purpose, parameter P6 "Ato" must be enabled (setting = Au
on). For more details, see parameter settings.
When the automatic totaliser is enabled, the display shows AUTO.
Put a weight on the weighing surface. As soon as the scale is stable, it will automatically add
the weight to the totaliser. This is confirmed by an audible signal.
Remove the weight from the weighing surface.
The display now shows "AC 1" and then the stored total weight before the scale returns to
the normal weighing mode.
As soon as the scale returns to zero position, a second weight can be applied, and the
weight will automatically be added to the totaliser.
A total of 99 operations can be performed or until the rated capacity of the scale has been
reached.
The total weight can be recalled as described above.
When the weighing surface is unloaded and the display shows zero, press the MR button to
recall the stored value. Now the scale display shows the number of weights as "AC xx" and
the total weight before returning to zero.
The total weight may also be output to a connected printer or PC via the RS232 interface
(optional, not upgrade-able).
To clear the totaliser, press the MC button.
10
ZW60-210531-Rev006-UM-en