4qd HIB-DNO 사용 설명서 - 페이지 2

{카테고리_이름} 4qd HIB-DNO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4qd HIB-DNO 3 페이지. Hall throttle interface board

Description



The HIB-DNO is an adaptor board designed to allow a 5V hall effect

throttle to be used with our DNO controllers.

Mounting

The HIB-DNO goes in the wiring between the throttle and the DNO. It is enclosed in

heat shrink tubing and can either be left free floating, or can be secured with a

cable tie or double-sided tape if required.

Connections

The HIB-DNO should be connected as per this diagram...

HIB-DNO V1.1 05/22

Page 2