Datexel DAT8016 설정 매뉴얼

{카테고리_이름} Datexel DAT8016에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datexel DAT8016 4 페이지. Modbus tcp th ermocouple input module

DATEXEL

Modbus TCP Th ermocouple input module DAT8016.

Set Up the DAT8016.

1. Connect 24 Vdc to O and P.

2. Connect CAT5 crossover cable to PC and

Ethernet RJ45 Port on the DAT8016.

3. Connect a Calibrator or short the input to

1 and 2.

4. Power up the DAT8016 Modbus TCP

Th ermocouple Module.

It is extremely important to use

a Cat 5 Crossover cable unless a

router is used.

To confi gure the DAT8016.

1. Open your web browser.

2. Type 192.168.1.100 into the address bar.

3. Click enter and the following page

should be seen.

Entering the User-name and Pass-

word.

1. Th e password is Fact_user.

2. Th e Password is Fact_pwd.

3. Click Enter, Run to run the soft ware.

www.datexel.com

Call 561 779 5660 for technical support.

LLC

1 of 4